2) After unzipping the vbceProgressBar.zip, you will see a set of directories:

PPC
HPC
Pro
PocketPC
Desktop

The vbceProgressBar has been compiled for Palm PC's, HPC's, Handheld Pro, and Pocket PC devices. 

Within each directory there are sub-directories for each chipset available on that device.  For example, the HPC directory has:

HPC\Emulation
HPC\SH3
HPC\MIPS

Each of these sub-directories contains the proper vbceProgressBar.dll compilation for that specific architecture.

** At this point you may continue following the steps in this document or you may register the control using the CE Control Manager.

3) If you are a VBCE user (This does not apply to NSBasic users) you must register the \Desktop\vbceProgressBar.dll for use within the VBCE/eVB IDE.   This is the desktop version of the control.

Under the \Desktop directory is the Win 9x/NT compiled control.  Register the vbceProgressBar.dll from using Regsvr32.exe using the following syntax:

regsvr32 \Desktop\vbceProgressBar.dll

Note: Be sure to substitute the exact location the \Desktop\vbceProgressBar.dll file as it appears on your machine.

4) This step will copy the appropriate files to your Emulation environment.  Empfile is a utility which is supplied in the CE SDK for copying files to the emulation environment.   Using Empfile, copy the vbceProgressBar.dll file to your emulator from the appropriate sub-directory.  Each processor type is split up in directory structures:

\HPC\Emulation\
\PPC\Emulation\
\PRO\Emulation\

For example, if you are copying the vbceProgressBar to the HPC Emulation environment, then you would type:

EMPFILE -c c:\hpc\emulation\vbceProgressBar.dll wce:windows\vbceProgressBar.dll
(Copy vbceProgressBar.dll to object store's \Windows directory)

5) IMPORTANT!  In the emulator, click on Start and choose the Run.  In the dialog box type:

\windows\regsvrce\windows\vbceProgressBar.dll
(Be sure to substitute the location where you placed the vbceProgressBar.dll)

Note: If you are using a PPC device, tap the taskbar once, and then using the virtual keyboard type in RUN23 to get the RUN dialog to appear.

6) Now, you will register the vbceProgressBar.dll in emulation by typing:

\windows\regsvrce \windows\vbceProgressBar.dll
(Be sure to substitute the location where you placed the vbceProgressBar.dll)

7) Now that the control is registered, you must make the control useable within the VBCE environment.  Using the CE Control Manager select the specific device that you want to register the vbceProgressBar.dll for Desktop Design Controls mode.

Choose Desktop Design Controls and then click on the Control Menu/Add New Control... Then browse to the \desktop\vbceProgressBar.dll (Substitute the directory on your hard drive where you unzipped the control).

Note: You must use the Control Manager to register the vbceProgressBar.dll from the \desktop sub-directory.  This must be done for all project types - i.e.  HPC, HPC/Pro, PPC, and Pocket PC.  Not performing this step will display the error message, "This control has not been marked for use in Windows CE" in the VBCE IDE.

E-mail VBCE.com Support if you experience any trouble with the installation.